Interlining Fabric for Shirt Collars and Cuffs
Shirt collars and cuffs need additional support to maintain their appearance during regular use. Without suitable reinforcement, these sections may lose their intended shape or appear less structured. Interlining fabric provides this support by adding another layer between the outer fabric layers. In shirt manufacturing, the choice of interlining depends on the fabric weight, collar design, cuff construction and desired stiffness. The material should provide enough reinforcement without making the garment uncomfortable or unnecessarily rigid.
Both woven and non-woven fusible interlining can be considered for shirt components. Woven varieties have an interlaced yarn structure and are useful where a more fabric-like support layer is preferred. Non-woven interlining is made by bonding fibres and is commonly used for collars, cuffs, plackets and other smaller garment parts. Its lighter construction makes it a practical option when the component requires support without the heavier structure associated with full-body interlining.
Choosing the Right Grade for Small Garment Parts
GSM is one of the specifications that manufacturers should compare when selecting collar and cuff interlining. Lighter woven grades between 30 and 60 GSM are commonly used for collars, cuffs and plackets. Non-woven options within the 30–82 GSM range are also available for different garment components. The final selection should be based on the fabric being used and the finish expected from the finished shirt.
Adhesive compatibility is equally important. The interlining should bond properly without affecting the outer fabric's appearance. Manufacturers should follow the recommended fusing temperature and pressing time for the selected grade. A sample test can help identify bubbling, uneven adhesion or excessive stiffness before bulk production begins. Double Ghoda supplies non-woven fusible interlining in 30–82 GSM grades, with 90-metre rolls and a width of 100 cm. Woven options are also available for applications that need a different level of support. Comparing the fabric specifications with the requirements of each garment component helps manufacturers make more suitable sourcing decisions.

Comments
Post a Comment